Enerdrive ePOWER Smart AC Chargers 30amp/24V EN32430
Enerdrive ePOWER Smart AC Chargers 30amp/24V EN32430
Enerdrive ePOWER Smart AC Chargers 30amp/24V EN32430
Enerdrive Logo
Natural Technology Systems
NTS ecostore
Roll over image to zoom in Click on image to zoom
Enerdrive ePOWER Smart AC Chargers 30amp/24V EN32430 Enerdrive ePOWER Smart AC Chargers 30amp/24V EN32430 Enerdrive ePOWER Smart AC Chargers 30amp/24V EN32430 Enerdrive LogoNatural Technology SystemsNTS ecostore

Enerdrive ePOWER Smart AC Chargers 30amp/24V EN32430

Enerdrive
Price:
$890.00

Description

FEATURES

  • Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks
  • Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three
  • Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3
  • Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator)
  • Smart Charging: The ePOWER battery charger will regulate its output based on the loads connected to your battery banks
  • Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz
  • LED Display: Easy to use “set and select” menu along with scrolling charger status
  • Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours
  • Temperature Sensor: Battery temperature sensor included with 3-meter cable
  • 5 Year Warranty from an Australian company renowned for customer support

PACKAGE INCLUDED:

  • 1 x Battery Charger
  • 1 x 3-Meter Cable
  • 1 x Manual

SPECIFICATIONS

Model EN31220 EN31240 EN31260 EN32430
CHARGER OUTPUT
Output Current (Maximum) 20A 40A 60A 30A
OUTPUT VOLTAGE RANGE
Charge 14.2 – 15.5 V 28.4 – 31.0V
Float 13.4 – 13.8 V 26.8 – 27.6V
– Equalize 16.0 V 32.0V
Charging Control Four stages (Bulk/Absorption/Float/Maintenance)
Two stages (Bulk/Absorption)
Constant Power Supply (Program setting)
Priority Battery Bank Charging
DC Output Bank Three (1 fully independent, 2 common with diode isolation)
Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Standby Current < 2 mA
CHARGER INPUT
AC Input Voltage (Nominal) 90 to 265 VAC
AC Input Operating Range 207-265 Vac (2.0 A Max)90-125 Vac (3.8 A Max) 207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max) 207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max) 207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max)
AC Input Frequency Range 47 – 63 Hz
Power Consumption 350W (Full Load) 700W (Full Load) 1050W (Full Load) 1050W (Full Load)
Power Factor Correction Yes
Charger Efficiency > 82%
PROTECTION AND FEATURES
Reverse Polarity Yes, (with user replaceable fuse/s)
Over Charge Yes, unit shutdown
Over Temperature Yes, unit de-rated and shutdown
Output Short Circuit Yes, (with user replaceable fuse/s)
Cooling Forced air ventilation (thermo controlled fan)
Temperature Setting Hot, Normal, Cold (no sensor connected)
Battery Temp Sensor Port RJ12 (standard battery temp. sensor supplied)
DISPLAY
LCD Display (with back light) Charging status, Battery Voltage, Output Current & Fault Codes.
AC INPUT AND DC OUTPUT CONNECTION
AC Input Connection IEC with Supplied 1.2M Power Lead
DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread
DC Output Ground Single Heavy Duty Common Ground Stud
ENVIRONMENTAL AND OPERATING TEMPERATURE
Storage Range -40° to 70° C
Operating Range -20° to 60° C
Humidity 5-95%, relative humidity non-condensing
Ingress Protection IP32 (Basic drip proof in vertical orientation)
Base Unit Weight and Dimensions
Weight: (kg) 2.4 2.6 4 4
Dimension: (mm) L x W x H 295 x 206 x 86 295 x 206 x 86 356 x 206 x 99 356 x 206 x 99
Optional Accessories Remote Digital Display / Enerdrive Part Number EN3REM
Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations.

 

You may also like

Recently viewed