Enerdrive ePOWER B-TEC 36V 100Ah Lithium Battery & 36V 20A Industrial Charger (K-100-04)

Sale price$4,590.00



Enerdrive ePOWER B-TEC 36V 100Ah Lithium Battery

The ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. 

Smart Phone Monitoring System

The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings

Lithium v AGM Capacities;

  • 100Ah Lithium = 160Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

 *Note: As stipulated by the manufacturer Enerdrive, failure to charge the Enerdrive Lithium Battery range with an Enerdrive or Redarc Lithium Profile battery charger will void Enerdrive manufacturer warranty.

Enerdrive ePOWER 36V 20 Amp Industrial Battery Charger

Enerdrive’s ePOWER Industrial Battery Charger is built to withstand vibration and exposure to dust or moisture typically found when used in typical on-board or industrial applications. Charge Algorithm updates and downloadable charger data logs are easily accessible via the use of a USB memory stick.

  • Extremely Durable
  • Programmable-Charging-USB Programmable Charging
  • Battery Charging Flexibility


  • Enerdrive ePOWER B-TEC 36V 100Ah Lithium Battery EPL-100BT-36V
  • Enerdrive ePOWER 36V 20 Amp Industrial Battery Charger EPI-3620


Model EPL-100BT-36V
GTIN (Global Trade Item Number) 9342616019672
Brands Enerdrive
Product Category Batteries
Amp Hours (Ah) 100.0 Ah
Battery Voltage 36V
Nominal Voltage 38.4V
Nominal Capacity 100Ah
Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles
Battery Charge Temperature 0 ̴ 45°C
Normal Charge Voltage CV/CC* 43.20 ̴ 43.80V
Standby (Float) Voltage 40.5 ̴ 41.40V
Maximum Charge Current 50A @ 25°C for 30mins
Recommended Charge Current for Maximum Life ≤ 33A
Battery Discharge Temperature -20 ̴ 60°C
Battery Output Voltage Range 33.00 ̴ 48.80V
Maximum Discharge Current 100A @ 25°C ± 5°C for 30mins
Pulse Discharge Current 450A for 1.0s
Discharge Cut-off Voltage ≤ 33.60V
Dimensions 519 x 273 x 222 mm (L x W x H)
Net Weight (kg) 37.7 Kg
Manufacturers Warranty 5 Years


Model EPI-3620
DC Output
Nominal Voltage (V) 36V
Maximum Voltage (V) 51V
Maximum Current (A) 20A
Applicable to battery
AGM, Flooded, GEL, Lithium & Custom Profiles
Reverse Polarity Electronic Protection Auto Reset
Short Circuit Electronic Protection Auto Reset
AC Input
Voltage Range (V) 100-240V
Frequency (Hz) 45-60Hz
Maximum Current (A)
MAX Power 850W
8.5A @100V
4.25A @230V
Full Load AC Power Factor >0.98
Other Specifications
Dimensions 20.7 x 18.0 x 16.0 cm
Weight 4.6kg
Operating Temperature -30°C ~ +50°C
Storage Temperature -40°C ~ +70°C


5-year warranty - Enerdrive warrants that its Products will be free from defects in materials and workmanship (subject to limits, and in normal conditions) for up to 5 years from the date of purchase.


* Where allowed by applicable law and regulations, batteries must be shipped via Ground shipments only. 

You may also like

Recently viewed