Enerdrive ePOWER B-TEC 24V 100Ah Lithium Battery & 24V 30A DC to DC Charger (K-100-03)

Sale price$3,390.00



Enerdrive ePOWER B-TEC 24V 100Ah Lithium Battery

The ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp-hour capacity.

Smart Phone Monitoring System

The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings

Lithium v AGM Capacities;

100Ah Lithium = 160Ah AGM
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

Enerdrive ePOWER 24V 30A DC to DC Battery Charger

The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller.

  • Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
  • DC M6 screw terminals that will allow for large battery cable connection between all sources
  • A dedicated Maximum Power Point (MPPT) solar regulator
  • The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
  • 30A output up to 40+°C with thermo controlled fan cooling
  • Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
  • Temperature sensor included in charger for more accurate battery charging


    • Enerdrive ePOWER B-TEC 24V 100Ah Lithium Battery EPL-100BT-24V
    • Enerdrive ePOWER 24V 30A DC to DC Battery Charger EN3DC30-24


    Model EPL-100BT-24V
    GTIN (Global Trade Item Number) 9342616019665
    Brands Enerdrive
    Product Category Batteries
    Amp Hours (Ah) 100.0 Ah
    Battery Voltage 24V
    Nominal Voltage 25.6V
    Nominal Capacity 100Ah
    Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles
    Battery Charge Temperature 0 ̴ 45°C
    Normal Charge Voltage CV/CC* 28.80 ̴ 29.20V
    Standby (Float) Voltage 27.00 ̴ 27.60V
    Maximum Charge Current 50A @ 25°C for 30mins
    Recommended Charge Current for Maximum Life ≤ 33A
    Battery Discharge Temperature -20 ̴ 60°C
    Battery Output Voltage Range 22.00 ̴ 29.20V
    Maximum Discharge Current 100A @ 25°C ± 5°C for 30mins
    Pulse Discharge Current 450A for 1.0s
    Discharge Cut-off Voltage ≤ 22.40V
    Dimensions 485 x 170 x 245 mm (L x W x H)
    Net Weight (kg) 25.0 Kg
    Manufacturers Warranty 5 Years


    Model EN3DC30-24
    GTIN (Global Trade Item Number) 9342616000533
    Brands Enerdrive
    Product Category Battery Chargers
    Product Type 24V 30A DC2DC Battery Charger
    Model EN3DC30-24
    Output Current Rating (Amps) 30.0 Amps
    Charger Mode Output Voltage 27.6V – 31.0V
    Float 26.0V – 27.6V
    Equalize 31.0V
    Charging Control 2 stage / 3 stage selectable (Default 3 Stage)
    DC Output Single
    Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
    Charger Efficiency 95%
    Temperature Setting
    Low/ Normal/ High (Battery Temperature Sensor Standard)
    Output System Voltage 24V
    Dimensions 74 x 172 x 242 mm (L x W x H)
    Net Weight (kg) 1.9 Kg
    Manufacturers Warranty 5 Years


    5-year warranty - Enerdrive warrants that its Products will be free from defects in materials and workmanship (subject to limits, and in normal conditions) for up to 5 years from the date of purchase.


    * Where allowed by applicable law and regulations, batteries must be shipped via Ground shipments only. 

    You may also like

    Recently viewed