Enerdrive ePOWER B-TEC 200Ah Lithium Battery + 12V 40A DC-DC Battery Charger K-200-10

Sale price$2,950.00



Enerdrive ePOWER B-TEC 200Ah Lithium Battery (EPL-200BT-12V-G2)

The New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery now comes with a 5 Year full replacement warranty. The ePOWER B-TEC is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. 

  • BMS restart button for easy recovery.
  • RS485 communications port for advanced system integration. 
  • Raised terminals for 360 degree cable connections.
  • Re-designed battery case for easy serviceability. 
  • Battery box and straps INCLUDED - nothing more to buy!
  • Product dimensions 505 x 173 x 265 mm

Smart Phone Monitoring System

The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

Battery Management System

The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings
Lithium v AGM Capacities;


    200Ah Lithium = 360Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

Enerdrive ePOWER 12V 40A DC to DC Battery Charger (EN3DC40+)

The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller.

EXPERT TIP: The Enerdrive 50Amp, 60Amp & 70Amp breakers are common accessories suitable for the Enerdrive EN3DC40+ 40A DC to DC charger. Additionally, the 3 pre-wired & fused charging cables are also a great extra accessories, see manuals & drawings for further information. All the accessories are available in the Accessory List above as optional extras.

  • Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
  • DC M6 screw terminals that will allow for large battery cable connection between all sources
  • A dedicated Maximum Power Point (MPPT) solar regulator
  • The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
  • 40A output up to 40+°C with thermo controlled fan cooling
  • Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
  • Temperature sensor included in charger for more accurate battery charging


          • Enerdrive ePOWER B-TEC 200Ah Lithium Battery  (EPL-200BT-12V-G2)
          • Enerdrive ePOWER 12V 40A DC to DC Battery Charger (EN3DC40+)


          Model EPL-200BT-12V-G2
          GTIN (Global Trade Item Number) 9342616019832
          Warehouse Enerdrive
          Brands Enerdrive
          Product Category Batteries
          Amp Hours (Ah) 200.0 Ah
          Battery Voltage 12V
          Float 13.50 - 13.80V
          Nominal Voltage 12.8V
          Nominal Capacity 200Ah
          Total Charge Current Max 150A @ 25°C for 30mins
          Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles
          Battery Charge Temperature 0 ̴ 45°C
          Normal Charge Voltage CV/CC* 14.40 ̴ 14.60V
          Standby (Float) Voltage 13.50 ̴ 13.80V
          Maximum Charge Current 150A @ 25°C for 30mins
          Recommended Charge Current for Maximum Life ≤ 60A
          Battery Discharge Temperature -20 ̴ 60°C
          Battery Output Voltage Range 11.00 ̴ 14.60V
          Maximum Discharge Current 200A @ 25°C ± 5°C for 30mins
          Pulse Discharge Current 450A for 1.0s
          Discharge Cut-off Voltage ≤ 11.20V
          Dimensions 505 x 172.5 x 265 mm (L x W x H)
          Net Weight (kg) 25.0 Kg
          Manufacturers Warranty 5 Years

          Model EN3DC40+
          GTIN (Global Trade Item Number) 9342616000526
          Warehouse Enerdrive
          Brands Enerdrive
          Product Category Battery Chargers
          Product Type 12v 40Amp DC2DC Battery Charger
          Output Current Rating (Amps) 40.0 Amps
          Charger Mode Output Voltage 13.8V - 15.5V
          Float 13.0V - 13.8V
          Equalize 15.5V
          Charging Control Three Stages
          DC Output Single
          Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
          Charger Efficiency 95%
          Temperature Setting
          Low/ Normal/ High (Battery Temperature Sensor Standard)
          Output System Voltage 12V
          Dimensions 242 x 172 x 74mm (L x W x H)
          Net Weight (kg) 1.9 Kg
          Manufacturers Warranty 5 Years


          5-year warranty - Enerdrive warrants that its Products will be free from defects in materials and workmanship (subject to limits, and in normal conditions) for up to 5 years from the date of purchase.


          * Availability Subject to Individual Items.

          ** This bundle is made to order. Please give us at least 3 weeks to prepare.

          *** Where allowed by applicable law and regulations, batteries must be shipped via Ground shipments only. 

          You may also like

          Recently viewed