Enerdrive ePOWER B-TEC 12V 200Ah Lithium Battery 40A AC Battery Charger K-200-01

Sale price$3,210.00



Enerdrive ePOWER B-TEC 12V 200Ah Lithium Battery

The New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery now comes with a 5 Year full replacement warranty. The ePOWER B-TEC is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

  • BMS restart button for easy recovery.
  • RS485 communications port for advanced system integration. 
  • Raised terminals for 360 degree cable connections.
  • Re-designed battery case for easy serviceability. 
  • Battery box and straps INCLUDED - nothing more to buy!
  • Product dimensions 505 x 173 x 265 mm

Smart Phone Monitoring System

The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

Battery Management System

The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings
Lithium v AGM Capacities; 

  • 200Ah Lithium = 360Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

Please Note: This ePOWER B-TEC lithium battery is capable to be paralleled to a second ePOWER B-TEC lithium battery. For maximum performance and lifespan of your lithium battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.

    Enerdrive ePOWER 12V 40A AC Battery Charger

    The ePOWER 12V 40A Battery Charger is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. The charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). 
    • Multistage Charging
    • Separate Battery Banks
    • Programmable
    • Current Control
    • Smart Charging
    • Wide AC Input Range
    • LED Display
    • Silent Mode
    • Temperature Sensor
    • 2 Year Warranty from an Australian company renowned for customer support.


        • Enerdrive ePOWER B-TEC 200Ah Lithium Battery  EPL-200BT-12V-G2
        • Enerdrive ePOWER 12V 40A Battery Charger EN31240 


        Model EPL-200BT-12V-G2
        GTIN (Global Trade Item Number) 9342616019832
        Warehouse Enerdrive
        Brands Enerdrive
        Product Category Batteries
        Amp Hours (Ah) 200.0 Ah
        Battery Voltage 12V
        Float 13.50 - 13.80V
        Nominal Voltage 12.8V
        Nominal Capacity 200Ah
        Total Charge Current Max 150A @ 25°C for 30mins
        Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles
        Battery Charge Temperature 0 ̴ 45°C
        Normal Charge Voltage CV/CC* 14.40 ̴ 14.60V
        Standby (Float) Voltage 13.50 ̴ 13.80V
        Maximum Charge Current 150A @ 25°C for 30mins
        Recommended Charge Current for Maximum Life ≤ 60A
        Battery Discharge Temperature -20 ̴ 60°C
        Battery Output Voltage Range 11.00 ̴ 14.60V
        Maximum Discharge Current 200A @ 25°C ± 5°C for 30mins
        Pulse Discharge Current 450A for 1.0s
        Discharge Cut-off Voltage ≤ 11.20V
        Dimensions 505 x 172.5 x 265 mm (L x W x H)
        Net Weight (kg) 25.0 Kg
        Manufacturers Warranty 5 Years
        Model EN31240
        Brand Enerdrive
        GTIN 9342616000250
        Product Category Battery Chargers
        Voltage 12V
        Output Current Rating (Amps) 40 Amps
        Weight 2.6 Kg
        Dimensions (L x W x H) 295 x 206x 86 mm


        5-year warranty - Enerdrive warrants that its Products will be free from defects in materials and workmanship (subject to limits, and in normal conditions) for up to 5 years from the date of purchase.


        * Availability Subject to Individual Items.

        ** This bundle is made to order. Please give us at least 3 weeks to prepare.

        *** Where allowed by applicable law and regulations, batteries must be shipped via Ground shipments only. 

        You may also like

        Recently viewed