Enerdrive ePOWER AC Smart Charger 60amp 12V EN31260

Sale price$839.00



  • Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
  • Separate Battery Banks: Isolated charging design where battery bank one is separate from battery banks two and three.
  • Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
  • Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
  • Smart Charging: The ePOWER 60A battery charger will regulate its output based on the loads connected to your battery banks.
  • Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
  • LED Display: Easy to use “set and select” menu along with scrolling charger status.
  • Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out a fan for 12 hours.
  • Temperature Sensor: Battery temperature sensor included with 3-meter cable.
  • 5 Year Warranty from an Australian company renowned for customer support.

Multistage Charging Process

The Enerdrive ePOWER 60A Battery Charger is a fully automatic, “set and forgets” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximize service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.


  • 1 x Battery Charger
  • 1 x 3-Meter Cable
  • 1 x Manual


    Enerdrive ePOWER Battery Charger Specifications

    Model EN31220 EN31240 EN31260 EN32430
    Output Current (Maximum) 20A 40A 60A 30A
    Charge 14.2 – 15.5 V 28.4 – 31.0V
    Float 13.4 – 13.8 V 26.8 – 27.6V
    – Equalize 16.0 V 32.0V
    Charging Control Four stages (Bulk/Absorption/Float/Maintenance)
    Two stages (Bulk/Absorption)
    Constant Power Supply (Program setting)
    Priority Battery Bank Charging
    DC Output Bank Three (1 fully independent, 2 common with diode isolation)
    Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
    Standby Current < 2 mA
    AC Input Voltage (Nominal) 90 to 265 VAC
    AC Input Operating Range 207-265 Vac (2.0 A-Max)90-125 Vac (3.8 A-Max) 207-265 Vac (3.8 A-Max)90 – 125 Vac (7.7 A-Max) 207-265 Vac (5.9 A-Max)90-125 Vac (11.3 A-Max) 207-265 Vac (5.9 A-Max)90-125 Vac (11.3 A-Max)
    AC Input Frequency Range 47 – 63 Hz
    Power Consumption 350W (Full Load) 700W (Full Load) 1050W (Full Load) 1050W (Full Load)
    Power Factor Correction Yes
    Charger Efficiency > 82%
    Reverse Polarity Yes, (with user-replaceable fuse/s)
    Over Charge Yes, unit shutdown
    Over Temperature Yes, the unit was de-rated and shutdown
    Output Short Circuit Yes, (with user-replaceable fuse/s)
    Cooling Forced air ventilation (Thermo controlled fan)
    Temperature Setting Hot, Normal, Cold (no sensor connected)
    Battery Temp Sensor Port RJ12 (standard battery temp. sensor supplied)
    LCD Display (with backlight) Charging status, Battery Voltage, Output Current & Fault Codes.
    AC Input Connection IEC with Supplied 1.2M Power Lead
    DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread
    DC Output Ground Single Heavy Duty Common Ground Stud
    Storage Range -40° to 70° C
    Operating Range -20° to 60° C
    Humidity 5-95%, relative humidity non-condensing
    Ingress Protection IP32 (Basic drip-proof in vertical orientation)
    Base Unit Weight and Dimensions
    Weight: (kg) 2.4 2.6 4 4
    Dimension: (mm) L x W x H 295 x 206 x 86 295 x 206 x 86 356 x 206 x 99 356 x 206 x 99
    Optional Accessories Remote Digital Display / Enerdrive Part Number EN3REM
    Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations.


    5-year warranty - Enerdrive warrants that its Products will be free from defects in materials and workmanship (subject to limits, and in normal conditions) for up to 5 years from the date of purchase.

    You may also like

    Recently viewed