Enerdrive B-TEC 200Ah Lithium Battery DC2DC + 40A AC Charger & ePRO+ Monitor K-200-07

Sale price$3,950.00



Enerdrive ePOWER B-TEC 200Ah Lithium Battery (EPL-200BT-12V-G2)

The New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery now comes with a 5 Year full replacement warranty. 

  • RS485 communications port for advanced system integration. 
  • Raised terminals for 360 degree cable connections.
  • Battery box and straps INCLUDED - nothing more to buy!

Smart Phone Monitoring System

The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

Battery Management System

The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings
Lithium v AGM Capacities;


    200Ah Lithium = 360Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

Enerdrive ePOWER 12V 40A DC to DC Battery Charger (EN3DC40+)

The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller.

EXPERT TIP: The Enerdrive 50Amp, 60Amp & 70Amp breakers are common accessories suitable for the Enerdrive EN3DC40+ 40A DC to DC charger. Additionally, the 3 pre-wired & fused charging cables are also a great extra accessories, see manuals & drawings for further information. All the accessories are available in the Accessory List above as optional extras.

  • Two totally independent DC Inputs
  • DC M6 screw terminals 
  • A dedicated (MPPT) solar regulator
  • The same battery algorithms as included in our AC mains ePOWER battery charger
  • 40A output up to 40+°C with thermo controlled fan cooling
  • Fully programmable LCD display to show which source is charging the battery 
  • Temperature sensor

Enerdrive ePOWER 12V 40A Battery Charger (EN31240)

The ePOWER 12V 40A Battery Charger is designed to quickly and accurately recharge your batteries using algorithms that help maximize service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. 
  • Multistage Charging
  • Separate Battery Banks
  • Programmable
  • Current Control
  • Smart Charging
  • Wide AC Input Range
  • LED Display
  • Silent Mode
  • Temperature Sensor
  • 2 Year Warranty from an Australian company renowned for customer support.

Enerdrive ePRO PLUS Battery Monitor (EN55050)

The ePRO PLUS is the latest generation, highly advanced battery monitor. It consists of an intelligent shunt and a remote control display unit. The shunt has a Grid Optimized footprint for perfect integration with our DC Modular products. This advanced battery monitor not only shows the true state of charge of your battery system. 

The ePRO PLUS can monitor up to three battery banks. The inputs for battery bank 2 and 3 can also be configured for other purposes, like mid-point voltage measurement, keyswitch input, setup lock or backlight control. 

  • Battery status information at a glance
  • Supports up to three battery banks
  • Plug and Play installation
  • Integration with Enerdrive DC Modular products


      • Enerdrive ePOWER B-TEC 200Ah Lithium Battery  (EPL-200BT-12V-G2)
      • Enerdrive ePOWER 12V 40A DC to DC Battery Charger (EN3DC40+)
      • Enerdrive ePOWER 12V 40A Battery Charger (EN31240)
      • Enerdrive ePRO PLUS Battery Monitor (EN55050)


      Model EPL-200BT-12V-G2
      GTIN (Global Trade Item Number) 9342616019832
      Warehouse Enerdrive
      Brands Enerdrive
      Product Category Batteries
      Amp Hours (Ah) 200.0 Ah
      Battery Voltage 12V
      Float 13.50 - 13.80V
      Nominal Voltage 12.8V
      Nominal Capacity 200Ah
      Total Charge Current Max 150A @ 25°C for 30mins
      Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles
      Battery Charge Temperature 0 ̴ 45°C
      Normal Charge Voltage CV/CC* 14.40 ̴ 14.60V
      Standby (Float) Voltage 13.50 ̴ 13.80V
      Maximum Charge Current 150A @ 25°C for 30mins
      Recommended Charge Current for Maximum Life ≤ 60A
      Battery Discharge Temperature -20 ̴ 60°C
      Battery Output Voltage Range 11.00 ̴ 14.60V
      Maximum Discharge Current 200A @ 25°C ± 5°C for 30mins
      Pulse Discharge Current 450A for 1.0s
      Discharge Cut-off Voltage ≤ 11.20V
      Dimensions 505 x 172.5 x 265 mm (L x W x H)
      Net Weight (kg) 25.0 Kg
      Manufacturers Warranty 5 Years

      Model EN3DC40+
      GTIN (Global Trade Item Number) 9342616000526
      Warehouse Enerdrive
      Brands Enerdrive
      Product Category Battery Chargers
      Product Type 12v 40Amp DC2DC Battery Charger
      Output Current Rating (Amps) 40.0 Amps
      Charger Mode Output Voltage 13.8V - 15.5V
      Float 13.0V - 13.8V
      Equalize 15.5V
      Charging Control Three Stages
      DC Output Single
      Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
      Charger Efficiency 95%
      Temperature Setting
      Low/ Normal/ High (Battery Temperature Sensor Standard)
      Output System Voltage 12V
      Dimensions 242 x 172 x 74mm (L x W x H)
      Net Weight (kg) 1.9 Kg
      Manufacturers Warranty 5 Years
      Model EN31240
      Brand Enerdrive
      GTIN 9342616000250
      Product Category Battery Chargers
      Voltage 12V
      Output Current Rating (Amps) 40 Ah
      Weight 2.6 Kg
      Dimensions (L x W x H) 295 x 206x 86 mm


      * Availability Subject to Individual Items.

      ** This bundle is made to order. Please give us at least 3 weeks to prepare.

      *** Where allowed by applicable law and regulations, batteries must be shipped via Ground shipments only.

      You may also like

      Recently viewed