Enerdrive 2x100Ah Lithium Battery 12V 40A DC-DC Battery Charger K-200-15

Sale price$2,550.00



Enerdrive 12V 100Ah eLITE Lithium Battery (EPL-100-12VLITE)

The new Enerdrive  12v 100Ah eLITE Lithium Battery has been designed as an “entry level” lithium battery for the customer who wants to get into the lithium market without having to spend big. This unit is a stripped back version of the ever popular 100Ah B-TEC Lithium battery but, without all the bells and whistles. 

Wireless Battery Monitoring Technology, not in this little beauty. To save costs, we decided to remove the monitoring option from the eLITE. Does this reduce the quality of the battery?, certainly not. Its all about offering a high quality battery at an entry level price.

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings

Lithium v AGM Capacities;

  • 100Ah Lithium = 160Ah AGM
  • 125Ah Lithium = 200Ah AGM
  • 200Ah Lithium = 320Ah AGM
  • 300Ah Lithium = 480Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

      Enerdrive ePOWER 12V 40A DC to DC Battery Charger (EN3DC40+)

      Designed to meet the rugged demands of Australian conditions and delivering multiple source charging for DC systems.

      • Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
      • DC M6 screw terminals that will allow for large battery cable connection between all sources
      • A dedicated Maximum Power Point (MPPT) solar regulator
      • The same battery algorithms as included in Enerdrives AC mains ePOWER battery charger including a specific lithium charging profile
      • 40A output up to 40+°C with thermo controlled fan cooling
      • Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
      • Temperature sensor included in charger for more accurate battery charging


        • 2 x Enerdrive 12V 100Ah eLITE Lithium Battery (EPL-100-12VLITE)
        • 1 x Enerdrive ePOWER 12V 40A DC to DC Battery Charger (EN3DC40+)


          Model EPL-100-12VLITE
          Nominal Voltage 12.8V
          Nominal Capacity 100Ah
          Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles
          Standard Charge Specification (Lithium profile charger required)
          Battery Charge Temperature 0 ̴ 45°C
          Normal Charge Voltage CV/CC* 14.20 ̴ 14.60V
          Standby (Float) Voltage 13.50 ̴ 13.60V
          Maximum Charge Current 80A @ 25°C for 30mins
          Recommended Charge Current for Maximum Life ≤33A
          Standard Discharge Specification
          Battery Discharge Temperature -20 ̴ 60°C
          Battery Output Voltage Range 11.00 ̴ 14.60V
          Maximum Discharge Current 100A @ 25°C ± 5°C for 30mins
          Pulse Discharge Current 450A for 1.0s
          Discharge Cut-off Voltage ≤11.20V
          Over-Charge Protection
          Over-charge Protection Per Cell 3.90V ± 0.03V
          Over-charge Release Per Cell 3.60V ± 0.05V
          Over-charge Release Method Discharge below release voltage
          Over-Discharge Protection
          Over-discharge Protection Per Cell 2.50V ± 0.05V
          Over-discharge Release Per Cell 3.20V ± 0.05V
          Over-discharge Release Method Apply Charge/Voltage ≥12.8V
          Battery Manual Reset Button No
          Over Current Protection
          Discharge Over Current 110A for 30s – 450A for 1s
          Protection Reset Time 5s Auto Release
          Over Current Release Method Disconnect Load
          Over Temperature Protection
          Battery Discharge Over Temperature Protection to 65°C ± 5°C
          Release at 50°C ± 5°C
          Battery Charge Over Temperature Protection to 55°C ± 5°C
          Release at 45°C ± 5°C
          Short Circuit Protection Auto release after 5s
          Mechanical Characteristics
          Dimensions Length 310mm
          Designed to be mounted in the upright position Width 170mm
          Height 225mm
          Weight Approx 12kg
          Storage Information
          Temperature & Humidity Range ≤ 30 days -20°C ̴ 35°C, 45 ̴ 75% RH
          ≥ 30 days -10°C ̴ 30°C, 45 ̴ 75% RH
          Self-discharge Rate ≤ 3% Per Month

          Model EN3DC40+
          GTIN (Global Trade Item Number) 9342616000526
          Brands Enerdrive
          Product Category Battery Chargers
          Product Type 12v 40Amp DC2DC Battery Charger
          Output Current Rating (Amps) 40.0 Amps
          Charger Mode Output Voltage 13.8V - 15.5V
          Float 13.0V - 13.8V
          Equalize 15.5V
          Charging Control Three Stages
          DC Output Single
          Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
          Charger Efficiency 95%
          Temperature Setting
          Low/ Normal/ High (Battery Temperature Sensor Standard)
          Output System Voltage 12V
          Dimensions 242 x 172 x 74mm (L x W x H)
          Net Weight (kg) 1.9 Kg


          5-year warranty - Enerdrive warrants that its Products will be free from defects in materials and workmanship (subject to limits, and in normal conditions) for up to 5 years from the date of purchase.


          * Availability Subject to Individual Items.

          ** This bundle is made to order. Please give us at least 3 weeks to prepare.

          *** Where allowed by applicable law and regulations, batteries must be shipped via Ground shipments only. 

          You may also like

          Recently viewed