Enerdrive 2x100Ah eLITE Lithium Battery 40A AC Charger + 40A DC2DC Charger K-200-13

Sale price$2,970.00



Enerdrive 12V 100Ah eLITE Lithium Battery (EPL-100-12VLITE)

The new Enerdrive  12v 100Ah eLITE Lithium Battery has been designed as an “entry-level” lithium battery for the customer who wants to get into the lithium market without having to spend big. This unit is a stripped-back version of the ever-popular 100Ah B-TEC Lithium battery but, without all the bells and whistles. 

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimize each Prismatic cell within the battery during normal operation. 

Size & Weight Savings

Lithium v AGM Capacities;

  • 100Ah Lithium = 160Ah AGM
  • 125Ah Lithium = 200Ah AGM
  • 200Ah Lithium = 320Ah AGM
  • 300Ah Lithium = 480Ah AGM

(Based on the standard depth of discharge for both Lithium (80%) and AGM (50%).

Enerdrive ePOWER 12V 40A Battery Charger (EN31240)

The ePOWER 12V 40A Battery Charger is designed to quickly and accurately recharge your batteries using algorithms that help maximize service life. 
  • Multistage Charging
  • Separate Battery Banks
  • Programmable
  • Current Control
  • Smart Charging
  • Wide AC Input Range
  • LED Display
  • Silent Mode
  • Temperature Sensor
  • 2 Year Warranty from an Australian company renowned for customer support.

    Enerdrive ePOWER 12V 40A DC to DC Battery Charger (EN3DC40+)

    • Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
    • DC M6 screw terminals that will allow for large battery cable connection between all sources
    • A dedicated Maximum Power Point (MPPT) solar regulator
    • The same battery algorithms as included in Enerdrives AC mains ePOWER battery charger including a specific lithium charging profile
    • 40A output up to 40+°C with thermo controlled fan cooling
    • Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
    • Temperature sensor included in charger for more accurate battery charging


      • 2 x Enerdrive 12V 100Ah eLITE Lithium Battery (EPL-100-12VLITE)
      • 1 x Enerdrive ePOWER 12V 40A Battery Charger (EN31240)
      • 1 x Enerdrive ePOWER 12V 40A DC to DC Battery Charger (EN3DC40+)


        Model EPL-100-12VLITE
        Nominal Voltage 12.8V
        Nominal Capacity 100Ah
        Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles
        Standard Charge Specification (Lithium profile charger required)
        Battery Charge Temperature 0 ̴ 45°C
        Normal Charge Voltage CV/CC* 14.20 ̴ 14.60V
        Standby (Float) Voltage 13.50 ̴ 13.60V
        Maximum Charge Current 80A @ 25°C for 30mins
        Recommended Charge Current for Maximum Life ≤33A
        Standard Discharge Specification
        Battery Discharge Temperature -20 ̴ 60°C
        Battery Output Voltage Range 11.00 ̴ 14.60V
        Maximum Discharge Current 100A @ 25°C ± 5°C for 30mins
        Pulse Discharge Current 450A for 1.0s
        Discharge Cut-off Voltage ≤11.20V
        Over-Charge Protection
        Over-charge Protection Per Cell 3.90V ± 0.03V
        Over-charge Release Per Cell 3.60V ± 0.05V
        Over-charge Release Method Discharge below release voltage
        Over-Discharge Protection
        Over-discharge Protection Per Cell 2.50V ± 0.05V
        Over-discharge Release Per Cell 3.20V ± 0.05V
        Over-discharge Release Method Apply Charge/Voltage ≥12.8V
        Battery Manual Reset Button No
        Over Current Protection
        Discharge Over Current 110A for 30s – 450A for 1s
        Protection Reset Time 5s Auto Release
        Over Current Release Method Disconnect Load
        Over Temperature Protection
        Battery Discharge Over Temperature Protection to 65°C ± 5°C
        Release at 50°C ± 5°C
        Battery Charge Over Temperature Protection to 55°C ± 5°C
        Release at 45°C ± 5°C
        Short Circuit Protection Auto release after 5s
        Mechanical Characteristics
        Dimensions Length 310mm
        Designed to be mounted in the upright position Width 170mm
        Height 225mm
        Weight Approx 12kg
        Storage Information
        Temperature & Humidity Range ≤ 30 days -20°C ̴ 35°C, 45 ̴ 75% RH
        ≥ 30 days -10°C ̴ 30°C, 45 ̴ 75% RH
        Self-discharge Rate ≤ 3% Per Month

        Model EN31240
        Brand Enerdrive
        GTIN 9342616000250
        Product Category Battery Chargers
        Voltage 12V
        Output Current Rating (Amps) 40 Ah
        Weight 2.6 Kg
        Dimensions (L x W x H) 295 x 206x 86 mm

        Model EN3DC40+
        GTIN (Global Trade Item Number) 9342616000526
        Brands Enerdrive
        Product Category Battery Chargers
        Product Type 12v 40Amp DC2DC Battery Charger
        Output Current Rating (Amps) 40.0 Amps
        Charger Mode Output Voltage 13.8V - 15.5V
        Float 13.0V - 13.8V
        Equalize 15.5V
        Charging Control Three Stages
        DC Output Single
        Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
        Charger Efficiency 95%
        Temperature Setting
        Low/ Normal/ High (Battery Temperature Sensor Standard)
        Output System Voltage 12V
        Dimensions 242 x 172 x 74mm (L x W x H)
        Net Weight (kg) 1.9 Kg



        * Availability Subject to Individual Items.

        ** This bundle is made to order. Please give us at least 3 weeks to prepare.

        *** Where allowed by applicable law and regulations, batteries must be shipped via Ground shipments only. 

        You may also like

        Recently viewed