Description
FEATURES
The MPPT RS SmartSolar is a 48V Solar charge controller with up to 450VDC PV input and either 100A, or 200A output. It is used in on-grid and off-grid solar applications where maximum battery charging power is required.
Multiple independent MPPT tracking inputs
With multiple MPPT trackers, you can optimize your solar panel design for maximum performance for your specific location.
Isolated PV connections for additional safety
Full galvanic isolation between PV and battery connections provide additional overall system safety.
Wide MPPT voltage range
80 – 450 VDC PV operating range, with a 120VDC PV startup voltage.
Lightweight, efficient and quiet
Thanks to high-frequency technology and a new design this powerful charger weighs only 7.9 kg for the 100A model. In addition to this, it has excellent efficiency, low standby power, and a very quiet operation.
Display and Bluetooth
The display reads battery, and controller parameters. The parameters can be accessed with a smartphone or other Bluetooth-enabled device. In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect.
PV Isolation resistance monitoring for peace of mind at higher voltages
The MPPT RS continuously monitors the PV array and can detect if there are faults that reduce the isolation of the panels to unsafe levels.
and t Port
For connection to a GX device for system monitoring, data logging, and remote firmware updates. allows for up to 25 units to be connected together in parallel and synchronize their charging.
I/O Connections
Programmable Relay, temperature sensor, auxiliary, digital input and voltage sensor connections. The remote input can accept the Victron small BMS, and other BMS with allow-to-charge signal.
SPECIFICATIONS
| Product Name | Victron SmartSolar MPPT RS Solar Charge Controller 450/200-Tr SCC145120410 |
| SKU | SCC145120410 |
| Brands | Victron |
| Product Category | Solar Charge Controllers |
| Amps | 200.0 Amps |
| Voltage | 48V |
| Charger Efficiency | 96% (max) |
| Start Voltage | 120V |
| Charge voltage 'absorption' | Default Setting: 57.6V (Adjustable) |
| Protection | PV reverse polarity | Output Short Circuit | Over Temperature |
| Standby (Float) Voltage | Default Setting: 55.2V (Adjustable) |
| Protection category | IP21 |
| Battery-connection | M8 Bolts |
| Weight (kg) | 13.7kg |
| Manufacturers Warranty | 5 Years |
WARRANTY
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of: Batteries: 2-year limited warranty Li-ion batteries: 3-year limited warranty All other products: 5-year limited warranty.
NOTE:
The option of a 10-year limited warranty can only be applied during the actual purchase of the product.