Description
Protects the battery against excessive discharge and can be used as a system on/off switch:
The Smart Battery Protect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. The Smart Battery Protect can also be used as a system on/off switch. See manual for details.
FEATURES
Bluetooth: programming made easy:
When using Bluetooth to program the Smart Battery Protect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin. If required, Bluetooth can be disabled.
A special setting for Li-ion batteries:
In this mode the Battery Protect can be controlled by the VE.Bus BMS.
Note: the Battery Protect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.
Ultra-low current consumption:
This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.
Over voltage protection:
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 64 V.
Ignition proof:
No relays but MOSFET switches, and therefore no sparks.
Delayed alarm output:
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.
Delayed load disconnect and delayed reconnect:
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage
SPECIFICATIONS
Product Name: Victron Smart Battery Protect 48V-100A, 3 Year Warranty
SKU: BPR110048000
GTIN (Global Trade Item Number): 8719076041252
Brands: Victron
Product Category: Batteries Other
Supply Voltage Range: 24-70V
Dimensions: 120 x 123 x 62
Net Weight (kg): 0.8 Kg
Temperature Range Full load: -40°C to +40°C (up to 60% of nominal load at 50°C)
Protections Electronics: IP67 (potted) | Connections: IP00
Amps: 100
Manufacturers Warranty: 3 years
NOTE:
The option of a 10-year limited warranty can only be applied during the actual purchase of the product.