Description
FEATURES
A MultiPlus, plus ESS (Energy Storage System) functionality- The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application.
PowerControl and PowerAssist - Boosting the capacity of the grid or a generator- A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function).
Solar energy: AC power available even during a grid failure- The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.
Two AC Outputs- The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected.
Virtually unlimited power thanks to parallel and three phase operation- Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units.
On-site system configuring, monitoring and control- Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.
Remote configuring and monitoring- Install a Color Control GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
SPECIFICATIONS
| MultiPlus-II | 48/8000/110-100/100 | 48/10000/140-100/100 |
| Power Control & Power Assist | Yes | |
| Transfer switch | 100 A | 100 A |
| Maximum AC input current | 100 A | 100 A |
| INVERTER | ||
| DC Input voltage range | 38 – 66 V | |
| Output | Output voltage: 230 VAC ± 2% | |
| Frequency: 50 Hz ± 0,1% (1) | ||
| Cont. output power at 25°C (3) | 8000 VA | 10000VA |
| Cont. output power at 25°C | 6400 W | 8000W |
| Cont. output power at 40°C | 5500 W | 7000W |
| Cont. output power at 65°C | 4000 W | 6000W |
| Maximum apparent feed-in power | 8000VA | 10000VA |
| Peak power | 15000 W | 18000 W |
| Maximum efficiency | 95% | 96% |
| Zero load power | 29 W | 38 W |
| Zero load power in AES mode | 19 W | 27 W |
| Zero load power in Search mode | 3 W | 4 W |
| CHARGER | ||
| AC Input | Input voltage range: 187-265 VAC | |
| Input frequency: 45 – 65 Hz | ||
| Charge voltage 'absorption' | 57,6 V | |
| Charge voltage 'float' | 55,2 V | |
| Storage mode | 52,8 V | |
| Maximum battery charge current (4) | 110 A | 140 A |
| Battery temperature and voltage sensor | Yes | |
| GENERAL | ||
| Auxiliary output | Yes (32 A) (50 A) | |
| External AC current sensor (optional) | 50 A | 100 A |
| Programmable relay (5) | Yes | |
| Protection (2) | a - g | |
| VE.Bus communication port | For parallel (not for 8k & 10k models) and three phase operation, | |
| remote monitoring and system integration | ||
| General purpose com. port | Yes, 2x | |
| Remote on-off | Yes | |
| Operating temperature range | -40 to +65°C (fan assisted cooling) | |
| Humidity (non-condensing) | max 95% | |
| ENCLOSURE | ||
| Material & Colour | steel, blue RAL 5012 | |
| Protection category | IP22 | |
| Battery-connection | Four M8 bolts | |
| 230 V AC-connection | Bolts M6 | |
| Weight | 42 kg | 49 kg |
| Dimensions (hxwxd) | 642 x 363 x 206 mm | 677 x 363 x 206 mm |
| STANDARDS | ||
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, | |
| EN-IEC 62109-1, EN-IEC 62109-2 | ||
| EN 55014-1, EN 55014-2 | ||
| Emission, Immunity | EN-IEC 61000-3-2, EN-IEC 61000-3-3 | |
| IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 | ||
| Uninterruptible power supply | IEC 62040-1, AS 620401.1 | |
| VDE-AR-N 4105, TOR-D4, AS/NZS 4777.2, NRS 097-2-1, UTE C15-712-1, C10/11, | ||
| Anti-islanding | RD 1699-RD 413, G59/3-2, G83/2 | |
| 1)Can be adjusted to60Hz3) Non-linear load, crest factor 3:1 | ||
| 2)Protection key: 4) At 25°Cambient | ||
| a)output shortcircuit5) Programmable relay which can be set for general | ||
| b)overload alarm, DC under voltage or genset start/stop | ||
| c)battery voltage too high function. AC rating: 230V / 4A, DC rating: 4A up to | ||
| d)battery voltage too low 35VDC and 1A up to60VDC | ||
| e)temperature too high | ||
| f)230 VAC on inverter output | ||
| g)input voltage ripple too high | ||
WARRANTY
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of: Batteries: 2 year limited warranty Li-ion batteries: 3 year limited warranty All other products: 5 -year limited warranty.
NOTE:
The option of a 10-year limited warranty can only be applied during the actual purchase of the product.