Description
FEATURES
The all-in-one solar power solution:
The Victron EasySolar-II GX integrates the following elements:
• A MultiPlus-II inverter/charger
• A SmartSolar MPPT -Tr solar charge controller
• A GX device with a 2 x 16 character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
Display and wifi:
The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other wifi enabled device. In addition, wifi can be used to set up the system and to change settings.
Solar charge controller:
The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.
GX device:
The integrated GX device includes:
• A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.
• A USB port
• A Ethernet port
• A VE.Direct port
The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.
SPECIFICATIONS
| EasySolar-II GX | EasySolar-II 48/5000/70-50 MPPT 250/100 GX |
| INVERTER/CHARGER | |
| PowerControl & PowerAssist | Yes |
| Transfer switch | 50A |
| Maximum AC input current | 50A |
| Auxiliary output | Yes (50A) |
| INVERTER | |
| Input voltage range | 38 – 66V |
| Output | Output voltage: 230 VAC ± 2% |
| Frequency: 50 Hz ± 0,1% (1) | |
| Cont. output power at 25°C (3) | 5000VA / 4000W |
| Cont. output power at 40°C / 65°C | 3700W / 3000W |
| Maximum apparent feed-in power | 4400W / 5000VA |
| Peak power | 9000W |
| Maximum efficiency | 96% |
| Zero load power | 18W |
| Zero load power in AES mode | 12 W |
| Zero load power in Search mode | 2W |
| CHARGER | |
| AC Input | Input voltage range: 187-265 VAC |
| Input frequency: 45 – 65 Hz | |
| Charge voltage 'absorption' | 57,6V |
| Charge voltage 'float' | 55,2V |
| Storage mode | 52,8V |
| Maximum battery charge current (4) | 70A |
| Battery temperature sensor | Yes |
| Programmable relay (5) | Yes |
| Protection (2) | a - g |
| VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration |
| General purpose com. port | Yes, 2x |
| SOLAR CHARGE CONTROLLER | |
| Model | SmartSolar MPPT 250/100-Tr |
| Maximum output current | 100A |
| Maximum PV power | 5800W |
| Maximum PV open circuit voltage | 250V |
| Maximum efficiency | 99% |
| Self-consumption | 20mA |
| Charge voltage 'absorption', default | 57,6V |
| Charge voltage 'float', default setting | 55,2V |
| Protection (2) | a – e |
| GENERAL | |
| Interfaces | BMS-Can, USB, Ethernet, VE.Direct, Wi-Fi |
| Remote on-off | Yes |
| Operating temp. range | -20 to +45°C (fan assisted cooling) Max. altitude 2000m |
| Humidity (non-condensing): | max 95% |
| ENCLOSURE | |
| Material & Colour | aluminum (blue RAL 5012) |
| Protection category | IP21 |
| Battery-connection | M8 bolts |
| PV connection | M6 bolts |
| 230 V AC-connection | Screw terminals 16 mm2 (6 AWG) |
| Weight | 38.6kg |
| Dimensions (hxwxd) | 604 x 323 x 253 mm |
WARRANTY
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of: Batteries: 2 year limited warranty Li-ion batteries: 3 year limited warranty All other products: 5 -year limited warranty.
NOTE:
The option of a 10-year limited warranty can only be applied during the actual purchase of the product.