Description
FEATURES
The Magnasine by Enerdrive products are designed and produced in the USA utilizing a tried and proven robust design platform, by a leading manufacturer of premium inverter/chargers for Mobile and Renewable Energy applications. With more than 70 years of combined inverter manufacturing and design experience, which has resulted in the MagnaSine by Enerdrive range being one of the industry’s most reliable and advanced inverter/chargers.
Install the ME series in four easy steps
Simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.
USA Made and Proven Design
- Massive Inverter Surge Capacity
- High Output Charging
- Easy to Install
- Low Frequency Transformer Inverter
ME-ARC Remote Contro
The ME-ARC remote control allows you to monitor and customize the operating parameters to your MagnaSine inverter/charger.
The ME-ARC comes standard with a 50 foot, 4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or inverter is removed). The MagnaSine remote control has all of the programming and operation functions included in an easy-to-use package.
ME-ARC displays
- Battery Voltage
- Inverting
- Battery Charging Status
- Inverter Charger operating status and warnings
- DC Load Amps, DC Amps Consumed and State of Charge (if ME-BMK Monitor Kit is being used)
Using the ME-ARC Remote Control, you can program:
- Charging algorithm of the batteries
- Battery Capacity
- Battery Charge Efficiency Factor
- Mains Current Limiter
- Charging Rate
- Mains AC Drop Out and Cut In
- Power Save
- Search Watts
- Low Battery Cut Out
SPECIFICATIONS
| Model | MS2712E - 12V | MS4124E - 24V | MS4348E - 48V |
|---|---|---|---|
| Inverter/Charger Specifications | |||
| Parallel Capable (Parallel stackable up to 4 units) | No | Yes (RTR Remote required) | Yes (RTR Remote required) |
| Input battery voltage range | 9 – 17 Vdc | 18 – 34 Vdc | 36 – 68 Vdc |
| Nominal AC output voltage | 230 Vac ±5% | ||
| Output frequency and accuracy | 50 Hz ± 0.4 Hz | ||
| Total Harmonic Distortion (THD) | < 5% | ||
| 1 msec surge current (amps AC) | 45 | 65 | 75 |
| 100 msec surge current (amps AC) | 21 | 30 | 37 |
| 5 sec surge power (real watts) | 4100 | 6300 | 7500 |
| 30 sec surge power (real watts) | 3750 | 5300 | 7100 |
| 5 min surge power (real watts) | 3600 | 4750 | 6600 |
| 30 min surge power (real watts) | 3500 | 4600 | 5000 |
| Continuous power output (@ 25°C) | 2700 VA | 4100 VA | 4300 VA |
| Maximum continuous input current | 360 ADC | 273 ADC | 143 ADC |
| Inverter efficiency (peak) | 86% | 90% | 91% |
| Transfer time | ~ 20 ms | ||
| Search mode (typical) | 9 watts | 9 watts | 10 watts |
| No load (230 VAC output, typical) | 34 watts | 30 watts | 28 watts |
| Waveform | Pure Sine Wave | ||
| Charger Specifications | |||
| Continuous output @ 25°C | 125 ADC | 105 ADC | 55 ADC |
| Charger efficiency (peak) | 83% | 88% | 91% |
| Power factor | > .95 | > .95 | > .95 |
| Input current at rated output (AC amps) | 8.5 | 14 | 16 |
| Transfer relay capability | 30 amps AC | ||
| Five stage charging capability | Bulk, Absorb, Float, Equalize (requires remote), and Battery SaverTM | ||
| Battery temperature compensation | Yes, 4.6 m (15′) Battery Temp Sensor standard | ||
| Internal cooling | 0 – 120 cfm variable speed drive using dual 92 mm brushless DC fans | ||
| Overcurrent protection | Yes, with two overlapping circuits | ||
| Over temperature protection | Yes on transformer, MOSFETS and battery | ||
| Conformal coating on PCBs for corrosion protection | Yes | ||
| Powder coated chassis & top for corrosion protection | Yes | ||
| Stainless steel fasteners for corrosion protection | Yes | ||
| Listings | C-Tick (Australian Standards) | ||
| Warranty | 2 Years | ||
| Environmental Specifications | |||
| Operating temperature | -20°C – +60°C | ||
| Non-operating temperature | -40°C – +70°C | ||
| Operating humidity | 0 – 95% RH non-condensing | ||
| Physical Specifications | |||
| Dimensions (H x W x L) | 20.3 x 32.1 x 34.9 cm | ||
| Mounting | Shelf (top or bottom up) or wall | ||
| Weight | 25.0 Kg | ||
| Shipping weight | 28.2 Kg | ||