Magnasine Auto Generator Start Fully Networked System (ME-AGS-N)


Price:
Sale price$704.00

Description

FEATURES

The Magnasine by Enerdrive products are designed and produced in the USA utilizing a tried and proven robust design platform, by a leading manufacturer of premium inverter/chargers for Mobile and Renewable Energy applications. With more than 70 years of combined inverter manufacturing and design experience, which has resulted in the MagnaSine by Enerdrive range being one of the industry’s most reliable and advanced inverter/chargers.

Install the ME series in four easy steps:

Simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

USA Made and Proven Design

  • Massive Inverter Surge Capacity
  • High Output Charging
  • Easy to Install
  • Low Frequency Transformer Inverter

ME-ARC Remote Control

The ME-ARC remote control allows you to monitor and customize the operating parameters to your MagnaSine inverter/charger.

The ME-ARC comes standard with a 50 foot, 4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or inverter is removed). The MagnaSine remote control has all of the programming and operation functions included in an easy-to-use package.

ME-ARC displays:

  • Battery Voltage 
  • Inverting
  • Battery Charging Status
  • Inverter Charger operating status and warnings
  • DC Load Amps, DC Amps Consumed and State of Charge (if ME-BMK Monitor Kit is being used)

Using the ME-ARC Remote Control, you can program:

  • Charging algorithm of the batteries
  • Battery Capacity
  • Battery Charge Efficiency Factor
  • Mains Current Limiter
  • Charging Rate
  • Mains AC Drop Out and Cut In
  • Power Save
  • Search Watts
  • Low Battery Cut Out

SPECIFICATIONS 

Model MS2712E - 12V MS4124E - 24V MS4348E - 48V
Inverter/Charger Specifications
Parallel Capable (Parallel stackable up to 4 units) No Yes (RTR Remote required) Yes (RTR Remote required)
Input battery voltage range 9 – 17 Vdc 18 – 34 Vdc 36 – 68 Vdc
Nominal AC output voltage 230 Vac ±5%
Output frequency and accuracy 50 Hz ± 0.4 Hz
Total Harmonic Distortion (THD) < 5%
1 msec surge current (amps AC) 45 65 75
100 msec surge current (amps AC) 21 30 37
5 sec surge power (real watts) 4100 6300 7500
30 sec surge power (real watts) 3750 5300 7100
5 min surge power (real watts) 3600 4750 6600
30 min surge power (real watts) 3500 4600 5000
Continuous power output (@ 25°C) 2700 VA 4100 VA 4300 VA
Maximum continuous input current 360 ADC 273 ADC 143 ADC
Inverter efficiency (peak) 86% 90% 91%
Transfer time ~ 20 ms
Search mode (typical) 9 watts 9 watts 10 watts
No load (230 VAC output, typical) 34 watts 30 watts 28 watts
Waveform Pure Sine Wave
Charger Specifications
Continuous output @ 25°C 125 ADC 105 ADC 55 ADC
Charger efficiency (peak) 83% 88% 91%
Power factor > .95 > .95 > .95
Input current at rated output (AC amps) 8.5 14 16
Transfer relay capability 30 amps AC
Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery SaverTM
Battery temperature compensation Yes, 4.6 m (15′) Battery Temp Sensor standard
Internal cooling 0 – 120 cfm variable speed drive using dual 92 mm brushless DC fans
Overcurrent protection Yes, with two overlapping circuits
Over temperature protection Yes on transformer, MOSFETS and battery
Conformal coating on PCBs for corrosion protection Yes
Powder coated chassis & top for corrosion protection Yes
Stainless steel fasteners for corrosion protection Yes
Listings C-Tick (Australian Standards)
Warranty 2 Years
Environmental Specifications
Operating temperature -20°C – +60°C
Non-operating temperature -40°C – +70°C
Operating humidity 0 – 95% RH non-condensing
Physical Specifications
Dimensions (H x W x L) 20.3 x 32.1 x 34.9 cm
Mounting Shelf (top or bottom up) or wall
Weight 25.0 Kg
Shipping weight 28.2 Kg

You may also like

Recently viewed