Description
FEATURES
Enerdrive ePOWER B-TEC 24V 100Ah Lithium Battery
The ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp-hour capacity.
Smart Phone Monitoring System
The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
- Battery Capacity
- Battery Voltage
- Battery Current (Amps)
- Battery State of Charge (SOC)
- Battery State of Health (SOH)
- Battery Status
- Individual Cell Voltage
- Battery Temperature
- Battery Cycles
- Battery Alarms
- Battery Event Information
Battery Management System
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
Size & Weight Savings
Lithium v AGM Capacities;
100Ah Lithium = 160Ah AGM
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
Enerdrive ePOWER 24V 30A DC to DC Battery Charger
The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller.
- Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
- DC M6 screw terminals that will allow for large battery cable connection between all sources
- A dedicated Maximum Power Point (MPPT) solar regulator
- The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
- 30A output up to 40+°C with thermo controlled fan cooling
- Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
- Temperature sensor included in charger for more accurate battery charging
PACKAGE INCLUDED
- Enerdrive ePOWER B-TEC 24V 100Ah Lithium Battery EPL-100BT-24V
- Enerdrive ePOWER 24V 30A DC to DC Battery Charger EN3DC30-24
SPECIFICATIONS
| Model | EPL-100BT-24V |
| GTIN (Global Trade Item Number) | 9342616019665 |
| Brands | Enerdrive |
| Product Category | Batteries |
| Amp Hours (Ah) | 100.0 Ah |
| Battery Voltage | 24V |
| Nominal Voltage | 25.6V |
| Nominal Capacity | 100Ah |
| Cycle Life (DOD – 80% under controlled conditions) | ≥ 2000 Cycles |
| Battery Charge Temperature | 0 ̴ 45°C |
| Normal Charge Voltage CV/CC* | 28.80 ̴ 29.20V |
| Standby (Float) Voltage | 27.00 ̴ 27.60V |
| Maximum Charge Current | 50A @ 25°C for 30mins |
| Recommended Charge Current for Maximum Life | ≤ 33A |
| Battery Discharge Temperature | -20 ̴ 60°C |
| Battery Output Voltage Range | 22.00 ̴ 29.20V |
| Maximum Discharge Current | 100A @ 25°C ± 5°C for 30mins |
| Pulse Discharge Current | 450A for 1.0s |
| Discharge Cut-off Voltage | ≤ 22.40V |
| Dimensions | 485 x 170 x 245 mm (L x W x H) |
| Net Weight (kg) | 25.0 Kg |
| Manufacturers Warranty | 5 Years |
| Model | EN3DC30-24 |
| GTIN (Global Trade Item Number) | 9342616000533 |
| Brands | Enerdrive |
| Product Category | Battery Chargers |
| Product Type | 24V 30A DC2DC Battery Charger |
| Model | EN3DC30-24 |
| Output Current Rating (Amps) | 30.0 Amps |
| Charger Mode Output Voltage | 27.6V – 31.0V |
| Float | 26.0V – 27.6V |
| Equalize | 31.0V |
| Charging Control | 2 stage / 3 stage selectable (Default 3 Stage) |
| DC Output | Single |
| Selectable Battery Type | Gel, AGM, Flooded, Lithium, Program |
| Charger Efficiency | 95% |
| Temperature Setting |
Low/ Normal/ High (Battery Temperature Sensor Standard)
|
| Output System Voltage | 24V |
| Dimensions | 74 x 172 x 242 mm (L x W x H) |
| Net Weight (kg) | 1.9 Kg |
| Manufacturers Warranty | 5 Years |
WARRANTY
5-year warranty - Enerdrive warrants that its Products will be free from defects in materials and workmanship (subject to limits, and in normal conditions) for up to 5 years from the date of purchase.
NOTE:
* Where allowed by applicable law and regulations, batteries must be shipped via Ground shipments only.