Enerdrive ePOWER B-TEC 125Ah Lithium Battery w/ 12V 40A DC to DC Battery Charger (K-125-05)


Price:
Sale price$2,300.00

Description

FEATURES

ENERDRIVE EPOWER B-TEC 125AH G2 LITHIUM BATTERY

The ePOWER B-TEC G2 is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. 

The Battery now includes a battery strap!

Smart Phone Monitoring System

The Enerdrive ePOWER B-TEC G2 battery incorporates wireless Battery Monitoring Technology. You can monitor the following information by downloading the app on your Android™ or Apple® smartphone or tablet device;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

Battery Management System

The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Lithium v AGM Capacities (Based on standard depth of discharge for both Lithium (80%) and AGM (50%);

  • 125Ah Lithium = 200Ah AGM

The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

Please Note: This ePOWER B-TEC lithium battery is capable to be paralleled to a second ePOWER B-TEC lithium battery. For maximum performance and lifespan of your lithium battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.

ENERDRIVE EPOWER 12V 40A DC TO DC BATTERY CHARGER

The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller.

EXPERT TIP: The Enerdrive 50Amp, 60Amp & 70Amp breakers are common accessories suitable for the Enerdrive EN3DC40+ 40A DC to DC charger. Additionally, the 3 pre-wired & fused charging cables are also a great extra accessories, see manuals & drawings for further information. All the accessories are available in the Accessory List above as optional extras.

  • Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
  • DC M6 screw terminals that will allow for large battery cable connection between all sources
  • A dedicated Maximum Power Point (MPPT) solar regulator
  • The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
  • 40A output up to 40+°C with thermo controlled fan cooling
  • Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
  • Temperature sensor included in charger for more accurate battery charging

        PACKAGE INCLUDED

        • Enerdrive ePOWER B-TEC 125Ah G2 Lithium Battery EPL-125BT-12V
        • Enerdrive ePOWER 12V 40A DC to DC Battery Charger EN3DC40+

        SPECIFICATIONS

        Model EPL-125BT-12V
        GTIN (Global Trade Item Number) 9342616019689
        Warehouse Enerdrive
        Brands Enerdrive
        Product Category Batteries
        Amp Hours (Ah) 125.0 Ah
        Battery Voltage 12V
        Nominal Voltage 12.8V
        Nominal Capacity 125Ah
        Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles
        Battery Charge Temperature 0 ̴ 45°C
        Normal Charge Voltage CV/CC* 14.40 ̴ 14.60V
        Standby (Float) Voltage 13.50 ̴ 13.80V
        Maximum Charge Current 60A @ 25°C for 30mins
        Recommended Charge Current for Maximum Life ≤ 40A
        Battery Discharge Temperature -20 ̴ 60°C
        Battery Output Voltage Range 11.00 ̴ 14.60V
        Maximum Discharge Current 100A @ 25°C ± 5°C for 30mins
        Pulse Discharge Current 450A for 1.0s
        Discharge Cut-off Voltage ≤11.20V
        Dimensions 318 x 165 x 215 mm (L x W x H)
        Net Weight (kg) 15.0 Kg
        Manufacturers Warranty 5 Years

        Model EN3DC40+
        GTIN (Global Trade Item Number) 9342616000526
        Warehouse Enerdrive
        Brands Enerdrive
        Product Category Battery Chargers
        Product Type 12v 40Amp DC2DC Battery Charger
        Output Current Rating (Amps) 40.0 Amps
        Charger Mode Output Voltage 13.8V - 15.5V
        Float 13.0V - 13.8V
        Equalize 15.5V
        Charging Control Three Stages
        DC Output Single
        Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
        Charger Efficiency 95%
        Temperature Setting
        Low/ Normal/ High (Battery Temperature Sensor Standard)
        Output System Voltage 12V
        Dimensions 242 x 172 x 74mm (L x W x H)
        Net Weight (kg) 1.9 Kg
        Manufacturers Warranty 5 Years

        WARRANTY

        5-year warranty - Enerdrive warrants that its Products will be free from defects in materials and workmanship (subject to limits, and in normal conditions) for up to 5 years from the date of purchase.
        NOTE:* Where allowed by applicable law and regulations, batteries must be shipped via Ground shipments only. 

        You may also like

        Recently viewed